Newly released
Pricing
| 1+ | £6.69 |
| 25+ | £5.17 |
| 100+ | £4.16 |
| 250+ | £3.59 |
| 500+ | £3.22 |
| 1K+ | £2.94 |
Technical specifications
| Number of Channels | 2 |
| Supply Voltage (minimum) | 4.5V |
| Supply Voltage (maximum) | 5.5V |
| Volume Range | -111.5 to +15.5 / 0.5dB steps |
| Input Selector | ±18V pro-level input signal |
| Interface | 3-Wired Serial |
Please also refer to Datasheets & Resources.
Features
- Gain range from-111.5dB to +15.5dB
- Gain step size 0.5dB
- THD 0.0002% in balanced mode
- SNR 124dB in balanced mode
- Crosstalk -110dB typical
- Input Signals up to +/-18V
- Zero Detection for Gain Changes
- Hardware and Software Mute
- Power On/Off Transient Suppression
Full description
The MAS6116 is an ultra low noise stereo volume control for audio systems. When used in a balanced mono mode the linearity is an impressive 0.0002% (THD+N).
The design is based on resistor chains with external op-amps, which provide flexibility for the supply voltage, signal swing, noise floor and cost optimisation. The gain of each channel can be independently programmed from -111.5dB to +15.5dB through a digital serial control interface.
Audible clicks on gain changes are eliminated by changing gains only when a zero crossing has been detected in the signal.The device also features peak level detection, which can be used for AGC.
The MAS6116 is available in a 16 pin SOIC package.
Evaluation Board MAS6116EB is available for this product.
Moisture sensitivity level: 3
ISO9001 supplier
RoHS 3 (EU 2015/863)
| Pack sizes & weights (for bulk orders) ? | ||
|---|---|---|
| Reel | 1000 | |
For scheduled orders and further information:
