NJM13700M-TE2 Dual Transconductance AmpFeatures | Pricing | Description | Datasheet
Not for new design
Please select a currency.
Your currency is defined when you set up your account. Please contact us if you would like to pay using a different currency than selected.
|Number of Circuits||2|
|Supply Voltage (minimum)|
|Supply Voltage (maximum)|
|Input Offset Voltage||0.4mV|
|Input Offset Current||100nA|
|Input Bias Current||400nA|
|Gain Bandwidth product|
Please also refer to the Datasheets & Resources tab.
- Special Function for Audio
The transconductance amplifier differs from the standard op-amp in two ways:-
The output is a constant current source whose output is proportional to the input voltage.
The gain,or more correctly,the transcondutance,is set externally by the adjustment of the current through the bias terminal.This controls the magnitude of the constant current source.
These unique features offer accurate gain without the use of negative feedback.This eliminates closed loop phase shift which can cause oscillations in conventional amplifiers.
The surface mount NJM13700M consists of two voltage controlled current (transconductance) amplifiers each with differential inputs and a push pull output.
The two amplifiers share common supplies but otherwise operate independently.
Linearising diodes are provided at the inputs to reduce distortion and allow higher input levels.The result is a 10dB signal to noise improvement referenced to 0.5% THD.
Controlled impedance buffers are provided which are designed to complement the dynamic range of the amplifiers.
Output dc levels are independant of input bias currents.