ORANGE-DD Dual Discrete Op-ampFeatures | Pricing | Description | Datasheet
Please select a currency.
Your currency is defined when you set up your account. Please contact us if you would like to pay using a different currency than selected.
|Number of Circuits||2|
|Supply Voltage (minimum)||±4.5V|
|Supply Voltage (maximum)||±18V|
|Input Offset Voltage||0.2mV|
|Input Offset Current||100,000nA|
|Input Bias Current||190,000nA|
|Gain Bandwidth product||50MHz|
Please also refer to the Datasheets & Resources tab.
- Low noise JFET front end
Orange's Dual Discrete Op-Amp has been specifically designed for one purpose: natural, clean audio for musical performances. Designed to fit an industry standard DIP 8 socket, it can be used in any CD player, DAC, or preamplifier that currently runs DIP-8 dual op-amps
The overall soundstage and transient detail will be greatly improved when used in pretty much all audio equipment that it can physically be fitted to. It has a very low noise Jfet front end so it can run with input impedances above 1M Ohms if needed.
This op amp has been tested as a replacement for the following parts, provided the equipment it's being used in has 22mm of height clearance and 5mm side clearance (per side):
OPA2604 | OPA2134 | TL072 | NE5532 | LM4562 | OP275 | OP285
Please check that the PSU can supply the extra current needed, especially if replacing more than one existing IC op-amp.
The Orange Dual Discrete Op-Amp is unity gain stable. When using it in new designs where gain (inverting or non inverting) is being added, a feedback loop bypass capacitor of 15pf is all that's needed to completely stabilise it.
Moisture sensitivity level: 1
RoHS 3 (EU 2015/863)
|Pack sizes & weights (for bulk orders) |
Refers to box sizes for larger shipments. Prices shown are for individual parts unless specified.
For scheduled orders and further information: