Technical Specifications
| THD typ | 0.01% |
| THD max | 0.02% |
| Supply Voltage (minimum) | ±4V |
| Supply Voltage (maximum) | ±18V |
| Supply Current | 2.4mA |
| Dynamic Range | 120dB |
| Total Gain Range | 130dB |
| THD typ from | 0.005% |
| Output Noise | -98dBV |
Please also refer to the Datasheets & Resources tab.
Features
- Wide Dynamic Range: >120dB
- Wide Gain Range: >130dB
- Exponential (dB) Gain Control
- No External Trim Required
- Wide Gain-Bandwidth: 20MHz
- Dual Gain-Control Ports (pos/neg)
- Pin-Compatible with 2150-Series
Full Description
The THAT 2180BL single-in-line VCA is a very high performance current-in / current-out device with two opposing-polarity,voltage-sensitive control ports.
It offers wide-range exponential control of gain and attenuation with low signal distortion.
The part is trimmed at wafer stage for low THD and control-voltage feedthrough without further adjustment.
The VCA design takes advantage of a fully complementary dielectric isolation process, which offers closely matched NPN/PNP pairs, to deliver discrete performance at IC prices.
The part is pre-trimmed for 0.02% distortion, allowing the user to optimise cost and performance.
Demonstration Board THAT2180DEMO is available for this product.
Moisture sensitivity level: 1
ISO9001 supplier
| Pack sizes & weights (for bulk orders) ? | ||
|---|---|---|
| Tube | 25 | |
For scheduled orders and further information:
