Pricing
This product is active but not available via the site.
To purchase this product or request a sample, please contact us.
Technical specifications
Voltage | 0V |
Family Voltage Range | 5V |
Supply Voltage (maximum) | 18V |
Output Current | 3,000mA |
Drop-out Voltage | 1.2V |
Voltage Reference Tolerance | 2% |
Ripple Rejection Ratio | 75dB |
Output Adjustable | Yes |
Noise Bypass Terminal | No |
Output Noise Voltage | 0.03mV |
Quiescent Current | 0.35mA |
Output Capacitor | 22μf |
Please also refer to the Datasheets & Resources tab.
Features
- Low dropout voltage at up to 3A
- Load regulation: 0.05% typical
- Trimmed current limit
- On-chip thermal limiting
- Ultra low current consumption (0.35mA typ.)
Full description
The UTC UZ2085 series are low dropout, three-terminal regulators with 3A output current capability. These devices have been optimized for low voltage applications including VTT bus termination in which transient response and minimum input voltage are critical.
The current limit is trimmed to ensure the specified output and controlled short-circuit current. On-chip thermal limitation provides protection against any combination of overload and ambient temperature that would create excessive junction temperature.
The UZ1086LA is a low dropout, three-terminal adjustable regulator with 1.5A output current capability.
It has been been optimized for low voltage operation where transient response and minimum input voltage are critical.
Current limit is trimmed to ensure specified output current and controlled short-circuit current.
On-chip thermal limiting provides protection against any combination of overload and ambient temperatures that would create excessive junction temperatures.
Unlike PNP type regulators where up to 10% of the output current is wasted as quiescent current, the quiescent current of the UZ1086 flows into the load, thus increasing efficiency.